HOME / TROUBLESHOOTING / PREREQUISITE CHECK “CHECKACTIVEFILESANDEXECUTABLES” FAILED Prerequisite Check “CheckActiveFilesAndExecutables” Failed

CHECKACTIVEFILESANDEXECUTABLES” FAILED Prerequisite Check “CheckActiveFilesAndExecutables” Failed

[oracle@oracleagent:Database] opatch apply
Oracle Interim Patch Installer version 12.2.0.1.27
Copyright (c) 2022, Oracle Corporation. All rights reserved.

Oracle Home : /u01/app/oracle/product/12.1.0
Central Inventory : /u01/app/oraInventory
from : /u01/app/oracle/product/12.1.0/oraInst.loc
OPatch version : 12.2.0.1.27
OUI version : 12.1.0.2.0
Logfile location: /u01/app/oracle/product/12.1.0/cfgtoollogs/opatch/opatch2022-01-21_08-04-36AM_1.log

Verifying environment and performing prerequisite checks…
Prerequisite check “CheckActiveFilesAndExecutables” failed.
The details are:

Following active executables are not used by opatch process :
/u01/app/oracle/product/12.1.0/lib/libclntsh.so.12.1

Following active executables are used by opatch process :

/u01/app/oracle/product/12.1.0/lib/libasmclntsh12.so
UtilSession failed: Prerequisite check “CheckActiveFilesAndExecutables” failed.
Logfile location: /u01/app/oracle/product/12.1.0/cfgtoollogs/opatch/opatch2022-01-21_08-04-36AM_1.log

OPatch failed with error code 73

Solution:

[oracle@oracleagent:Database] /sbin/fuser /u01/app/oracle/product/12.1.0/lib/libclntsh.so.12.1
/u01/app/oracle/product/12.1.0/lib/libclntsh.so.12.1: 22235m 24173m
[oracle@oracleagent:Database] kill -9 22235 24173
[oracle@oracleagent:Database] opatch apply
Oracle Interim Patch Installer version 12.2.0.1.27
Copyright (c) 2022, Oracle Corporation. All rights reserved.

Oracle Home : /u01/app/oracle/product/12.1.0
Central Inventory : /u01/app/oraInventory
from : /u01/app/oracle/product/12.1.0/oraInst.loc
OPatch version : 12.2.0.1.27
OUI version : 12.1.0.2.0
Logfile location: /u01/app/oracle/product/12.1.0/cfgtoollogs/opatch/opatch2022-01-21_08-08-33AM_1.log

Verifying environment and performing prerequisite checks…
OPatch continues with these patches: 32768233 33128590

Do you want to proceed? [y|n]
y
User Responded with Y
All checks passed.

Please shutdown Oracle instances running out of this ORACLE_HOME on the local system.
(Oracle Home = ‘/u01/app/oracle/product/12.1.0’)

Is the local system ready for patching? [y|n]
y
User Responded with Y
Backing up files…
Applying sub-patch ‘32768233’ to OH ‘/u01/app/oracle/product/12.1.0’
ApplySession: Optional component(s) [ oracle.network.cman, 12.1.0.2.0 ] not present in the Oracle Home or a higher version is found.

 

…..

….

…..

 

Thank you for giving your valuable time to read the above information.

If you want to be updated with all our articles send us the Invitation or Follow us:

Ramkumar’s LinkedIn: https://www.linkedin.com/in/ramkumardba/
LinkedIn Group: https://www.linkedin.com/in/ramkumar-m-0061a0204/
Facebook Page: https://www.facebook.com/Oracleagent-344577549964301
Ramkumar’s Twitter: https://twitter.com/ramkuma02877110
Ramkumar’s Telegram: https://t.me/oracleageant
Ramkumar’s Facebook: https://www.facebook.com/ramkumarram8

ASM TOOLS and Configuration Basic Commands.

1. check the asm process running:

[oracle@asm ~]$ ps -ef|grep smon
oracle 8648 23558 0 16:52 pts/0 00:00:00 grep –color=auto smon
oracle 9349 1 0 09:50 ? 00:00:00 ora_smon_oraasm
oracle 30582 1 0 Jan01 ? 00:00:02 asm_smon_+ASM
[oracle@asm ~]$ ps -ef|grep d.bin
oracle 10968 23558 0 16:54 pts/0 00:00:00 grep –color=auto d.bin
oracle 26445 1 0 Jan01 ? 00:09:46 /u01/app/grid/bin/ohasd.bin reboot
oracle 26662 1 0 Jan01 ? 00:12:17 /u01/app/grid/bin/oraagent.bin
oracle 26733 1 0 Jan01 ? 00:04:50 /u01/app/grid/bin/evmd.bin
oracle 26796 26733 0 Jan01 ? 00:04:47 /u01/app/grid/bin/evmlogger.bin -o /u01/app/grid/log/[HOSTNAME]/evmd/evmlogger.info -l /u01/app/grid/log/[HOSTNAME]/evmd/evmlogger.log
oracle 27085 1 0 Jan01 ? 00:00:02 /u01/app/grid/bin/tnslsnr LISTENER -no_crs_notify -inherit
oracle 30264 1 0 Jan01 ? 00:05:25 /u01/app/grid/bin/cssdagent
oracle 30302 1 0 Jan01 ? 00:05:13 /u01/app/grid/bin/ocssd.bin
[oracle@asm ~]$ hostname
asm.localdomain
[oracle@asm ~]$ uname -r
3.10.0-957.el7.x86_64

2. check cluster resource status:

[oracle@asm ~]$ export PATH=$GRID_HOME/bin:$PATH
[oracle@asm ~]$ crsctl stat res -t
——————————————————————————–
Name Target State Server State details
——————————————————————————–
Local Resources
——————————————————————————–
ora.DATA.dg
ONLINE ONLINE asm STABLE
ora.LISTENER.lsnr
ONLINE ONLINE asm STABLE
ora.asm
ONLINE ONLINE asm Started,STABLE
ora.ons
OFFLINE OFFLINE asm STABLE
——————————————————————————–
Cluster Resources
——————————————————————————–
ora.cssd
1 ONLINE ONLINE asm STABLE
ora.diskmon
1 OFFLINE OFFLINE STABLE
ora.evmd
1 ONLINE ONLINE asm STABLE
ora.oraasm.db
1 ONLINE ONLINE asm Open,HOME=/u01/app/o
racle/product/19.0.0
/dbhome_1,STABLE
——————————————————————————–

3. check database running status and start stop database:

[oracle@asm ~]$ srvctl status database -d oraasm
Database is running.
[oracle@asm ~]$

srvctl stop database -d oraasm
srvctl start database -d oraasm

4. check oracle home in grid:

[oracle@asm ~]$ . grid.env
[oracle@asm ~]$ env |grep ORA
ORACLE_SID=+ASM
ORACLE_BASE=/u01/app/oracle
ORACLE_HOSTNAME=asm.localdomain
ORACLE_TERM=xterm
ORACLE_HOME=/u01/app/grid
[oracle@asm ~]$

5. check oracle home in database:

[oracle@asm ~]$ . db.env
[oracle@asm ~]$ env |grep ORA
ORACLE_SID=oraasm
ORACLE_BASE=/u01/app/oracle
ORACLE_HOSTNAME=asm.localdomain
ORACLE_TERM=xterm
ORACLE_HOME=/u01/app/oracle/product/19.3.0/dbhome_1
[oracle@asm ~]$

6. List the disks:

[root@asm ~]# cd /dev/
[root@asm dev]# ll sd*
brw-rw—-. 1 root disk 8, 0 Dec 31 10:45 sda
brw-rw—-. 1 root disk 8, 1 Dec 31 10:45 sda1
brw-rw—-. 1 root disk 8, 2 Dec 31 10:45 sda2
brw-rw—-. 1 root disk 8, 3 Dec 31 10:45 sda3
brw-rw—-. 1 root disk 8, 4 Dec 31 10:45 sda4
brw-rw—-. 1 root disk 8, 5 Dec 31 10:45 sda5
brw-rw—-. 1 root disk 8, 16 Dec 31 11:57 sdb
brw-rw—-. 1 root disk 8, 17 Dec 31 12:00 sdb1
brw-rw—-. 1 root disk 8, 32 Dec 31 11:58 sdc
brw-rw—-. 1 root disk 8, 33 Dec 31 12:00 sdc1

ASM TOOLS:
INSTALLATION TOOLS -oracleasm
ADMINSTRATION – asmcmd
DEBUGGING – kfod kfed ocrcheck

7. scan and list the disk using oracleasm:
[root@asm dev]# oracleasm scandisks
Reloading disk partitions: done
Cleaning any stale ASM disks…
Scanning system for ASM disks…
[root@asm dev]# oracleasm listdisks
DISK1
DISK2
[root@asm dev]#

8. asmcmd tool:

[oracle@asm ~]$ asmcmd
ASMCMD>
ASMCMD>

I. list the disk group
ASMCMD> lsdg
State Type Rebal Sector Logical_Sector Block AU Total_MB Free_MB Req_mir_free_MB Usable_file_MB Offline_disks Voting_files Name
MOUNTED EXTERN N 512 512 4096 4194304 30712 25860 0 25860 0 N DATA/
ASMCMD>

II. list datafile,controlfile

ASMCMD> cd DATA/
ASMCMD> ls
ASM/
ORAASM/
orapwasm
ASMCMD> cd ORAASM
ASMCMD> ls
86B637B62FE07A65E053F706E80A27CA/
CONTROLFILE/
D47CB418C2B91B66E053867EA8C0C5A0/
D47CEAB72C2F2513E053867EA8C0538D/
DATAFILE/
ONLINELOG/
PARAMETERFILE/
TEMPFILE/
ASMCMD> cd DATAFILE
ASMCMD> ls
SYSAUX.258.1092813853
SYSTEM.257.1092813819
UNDOTBS1.259.1092813869
USERS.260.1092813869
ASMCMD> pwd
+DATA/ORAASM/DATAFILE
ASMCMD>

9. check css,has status:

[oracle@asm ~]$ crsctl check has
CRS-4638: Oracle High Availability Services is online
[oracle@asm ~]$ crsctl check css
CRS-4529: Cluster Synchronization Services is online
[oracle@asm ~]$

10. check has version:

[oracle@asm ~]$ crsctl query has releaseversion
Oracle High Availability Services release version on the local node is [19.0.0.0.0]
[oracle@asm ~]$ crsctl query has softwareversion
Oracle High Availability Services version on the local node is [19.0.0.0.0]
[oracle@asm ~]$

11. asmca —> GUI for create and manage diskgroup:

12. KFOD – discovering disks with the help of asm disk strings:
KFED – discovering disk headers

[oracle@asm ~]$ cd $ORACLE_HOME/bin
[oracle@asm bin]$ pwd
/u01/app/grid/bin
[oracle@asm bin]$ ll kfod
-rwxrwxr-x. 1 oracle oinstall 11453 Dec 31 12:22 kfod
[oracle@asm bin]$ ll kfed
-rwxrwxr-x. 1 oracle oinstall 142432 Dec 31 12:20 kfed

[oracle@asm bin]$ kfod status=TRUE disks=ALL
——————————————————————————–
Disk Size Header Path User Group
================================================================================
1: 20479 MB MEMBER /dev/oracleasm/disks/DISK1 oracle oinstall
2: 10239 MB MEMBER /dev/oracleasm/disks/DISK2 oracle oinstall
——————————————————————————–
ORACLE_SID ORACLE_HOME
================================================================================
+ASM /u01/app/grid
[oracle@asm bin]$

[oracle@asm bin]$ kfed read /dev/oracleasm/disks/DISK1 | egrep ‘name|size|type’
kfbh.type: 1 ; 0x002: KFBTYP_DISKHEAD
kfdhdb.dskname: DATA_0000 ; 0x028: length=9
kfdhdb.grpname: DATA ; 0x048: length=4
kfdhdb.fgname: DATA_0000 ; 0x068: length=9
kfdhdb.secsize: 512 ; 0x0b8: 0x0200
kfdhdb.blksize: 4096 ; 0x0ba: 0x1000
kfdhdb.ausize: 4194304 ; 0x0bc: 0x00400000
kfdhdb.dsksize: 5119 ; 0x0c4: 0x000013ff
[oracle@asm bin]$

13. check olr and ocr location :
[oracle@asm ~]$ ocrcheck
Status of Oracle Cluster Registry is as follows :
Version : 4
Total space (kbytes) : 491684
Used space (kbytes) : 82368
Available space (kbytes) : 409316
ID : 786336035
Device/File Name : /u01/app/grid/cdata/localhost/local.ocr
Device/File integrity check succeeded

Device/File not configured

Device/File not configured

Device/File not configured

Device/File not configured

Cluster registry integrity check succeeded

Logical corruption check bypassed due to non-privileged user

[oracle@asm ~]$
[oracle@asm ~]$ ocrcheck -local
Status of Oracle Local Registry is as follows :
Version : 4
Total space (kbytes) : 491684
Used space (kbytes) : 83496
Available space (kbytes) : 408188
ID : 476403298
Device/File Name : /u01/app/oracle/crsdata/asm/olr/asm_19.olr
Device/File integrity check succeeded

Local registry integrity check succeeded

Logical corruption check bypassed due to non-privileged user

[oracle@asm ~]$ ocrcheck -local -config
Oracle Local Registry configuration is :
Device/File Name : /u01/app/oracle/crsdata/asm/olr/asm_19.olr
[oracle@asm ~]$

14. Check the asm status in sysasm admin:

[oracle@asm ~]$ sqlplus / as sysasm

SQL*Plus: Release 19.0.0.0.0 – Production on Sun Jan 2 17:57:52 2022
Version 19.3.0.0.0

Copyright (c) 1982, 2019, Oracle. All rights reserved.

Connected to:
Oracle Database 19c Enterprise Edition Release 19.0.0.0.0 – Production
Version 19.3.0.0.0

15. check instance type:

SQL> show parameter INSTANCE_TYPE

NAME TYPE VALUE
———————————— ———– ——————————
instance_type string ASM

16. spfile location:

SQL> show parameter spfile

NAME TYPE VALUE
———————————— ———– ——————————
spfile string +DATA/ASM/ASMPARAMETERFILE/reg
istry.253.1092745689

17. pfile creation:
SQL> create pfile from spfile;

File created.

SQL> exit
Disconnected from Oracle Database 19c Enterprise Edition Release 19.0.0.0.0 – Production
Version 19.3.0.0.0
[oracle@asm ~]$ cd $ORACLE_HOME/dbs
[oracle@asm dbs]$ ls
ab_+ASM.dat hc_+ASM.dat init+ASM.ora init.ora
[oracle@asm dbs]$ cat init+ASM.ora
+ASM.__oracle_base=’/u01/app/oracle’#ORACLE_BASE set from in memory value
.asm_diskstring=’/dev/oracleasm/disks’
.asm_power_limit=1
.large_pool_size=12M
.remote_login_passwordfile=’EXCLUSIVE’
[oracle@asm dbs]$ sqlplus / as sysasm

SQL*Plus: Release 19.0.0.0.0 – Production on Sun Jan 2 18:01:05 2022
Version 19.3.0.0.0

Copyright (c) 1982, 2019, Oracle. All rights reserved.

Connected to:
Oracle Database 19c Enterprise Edition Release 19.0.0.0.0 – Production
Version 19.3.0.0.0

18. instance type and status:

SQL> select instance_name,status from v$instance;

INSTANCE_NAME STATUS
—————- ————
+ASM STARTED

SQL> exit
Disconnected from Oracle Database 19c Enterprise Edition Release 19.0.0.0.0 – Production
Version 19.3.0.0.0
[oracle@asm dbs]$ crsctl stat res -t
——————————————————————————–
Name Target State Server State details
——————————————————————————–
Local Resources
——————————————————————————–
ora.DATA.dg
ONLINE ONLINE asm STABLE
ora.LISTENER.lsnr
ONLINE ONLINE asm STABLE
ora.asm
ONLINE ONLINE asm Started,STABLE
ora.ons
OFFLINE OFFLINE asm STABLE
——————————————————————————–
Cluster Resources
——————————————————————————–
ora.cssd
1 ONLINE ONLINE asm STABLE
ora.diskmon
1 OFFLINE OFFLINE STABLE
ora.evmd
1 ONLINE ONLINE asm STABLE
ora.oraasm.db
1 ONLINE ONLINE asm Open,HOME=/u01/app/o
racle/product/19.0.0
/dbhome_1,STABLE
——————————————————————————–
[oracle@asm dbs]$

19. ASMCMD check datafile and controlfile:

[oracle@asm dbs]$ asmcmd
ASMCMD>
ASMCMD>
ASMCMD>
ASMCMD> lsdg
State Type Rebal Sector Logical_Sector Block AU Total_MB Free_MB Req_mir_free_MB Usable_file_MB Offline_disks Voting_files Name
MOUNTED EXTERN N 512 512 4096 4194304 30712 25852 0 25852 0 N DATA/
ASMCMD> cd +DATA/oraasm/datafile
ASMCMD> ls
SYSAUX.258.1092813853
SYSTEM.257.1092813819
UNDOTBS1.259.1092813869
USERS.260.1092813869
ASMCMD> ls -l
Type Redund Striped Time Sys Name
DATAFILE UNPROT COARSE JAN 02 17:00:00 Y SYSAUX.258.1092813853
DATAFILE UNPROT COARSE JAN 02 17:00:00 Y SYSTEM.257.1092813819
DATAFILE UNPROT COARSE JAN 02 17:00:00 Y UNDOTBS1.259.1092813869
DATAFILE UNPROT COARSE JAN 02 17:00:00 Y USERS.260.1092813869
ASMCMD>

ASMCMD> cd +DATA/oraasm/parameterfile

ASMCMD> ls -l
Type Redund Striped Time Sys Name
PARAMETERFILE UNPROT COARSE JAN 02 17:00:00 Y spfile.274.1092815069
ASMCMD>

ASMCMD> ls -l
Type Redund Striped Time Sys Name
ASMPARAMETERFILE UNPROT COARSE DEC 31 12:00:00 Y REGISTRY.253.1092745689
ASMCMD> pwd
+DATA/ASM/ASMPARAMETERFILE
ASMCMD>

20. query to check asm_disk and asm disk_group:

SQL> select disk_number,name,path,header_status,mode_status,state,total_mb,free_mb from v$asm_disk;

DISK_NUMBER NAME PATH HEADER_STATU MODE_ST STATE TOTAL_MB FREE_MB
—————————————————————————————————-
0 DATA_0000 /dev/oracleasm/disks/DISK1 MEMBER ONLINE NORMAL 20476 17228

1 DATA_0001 /dev/oracleasm/disks/DISK2 MEMBER ONLINE NORMAL 10236 8624

 

SQL> select group_number,name,state,type from v$asm_diskgroup;

GROUP_NUMBER NAME STATE TYPE
———— —————————— ———– ——
1 DATA MOUNTED EXTERN

SQL>

 

Thank you for giving your valuable time to read the above information.

If you want to be updated with all our articles send us the Invitation or Follow us:

Ramkumar’s LinkedIn: https://www.linkedin.com/in/ramkumardba/
LinkedIn Group: https://www.linkedin.com/in/ramkumar-m-0061a0204/
Facebook Page: https://www.facebook.com/Oracleagent-344577549964301
Ramkumar’s Twitter: https://twitter.com/ramkuma02877110
Ramkumar’s Telegram: https://t.me/oracleageant
Ramkumar’s Facebook: https://www.facebook.com/ramkumarram8

Oracle Data Guard Manual Switchover

Oracle Data Guard Manual Switchover.

Description:
          In this blog, we are going to see step by step process of oracle data guard manual switchover process physical standby to primary.

Switch Over:
          A switchover is a role reversal between the primary database and one of its standby databases. A switchover guarantees no data loss. This is typically done for planned maintenance of the primary system. During a switchover, the primary database transitions to a standby role, and the standby database transitions to the primary role. The transition occurs without having to re-enable either database.

Overall Steps:

1. Check Primary and Standby database role and open_mode.
2. Change nls_date_format and check current log sync status.
3. Check switch over status both primary and standby servers.
4. Primary side switch over process.
5. Standby side switch over process.
6. Check the log sync status both sides.
7. New primary database parameter configuration.
8. Switch log files and check the log sync status.

Step 1:- Check primary and standby database role and open_mode.

SQL> select name,open_mode,database_role from v$database;
Step 2:- Change nls_date_format and check current log sync status.

check the log sequence on both primary and standby sides.
SQL> ALTER SESSION SET nls_date_format=’DD-MON-YYYY HH24:MI:SS’;
Session altered.
SQL> SELECT sequence#, first_time, next_time, applied FROM v$archived_log ORDER BY sequence#;
Step 3:- Check switch over status both primary and standby servers.
SQL> select switchover_status from v$database;

Step 4:- Primary side switch over process.

Switch over to standby.
SQL> alter database commit to switchover to standby;
Database altered.
Bounce the database.
SQL> shut immediate
SQL> startup nomount
Mount standby database.
SQL> alter database mount standby database;
Start MRP process.
SQL> alter database recover managed standby database disconnect from session;
Database altered.
check the database role.
SQL> select name,open_mode,database_role from v$database;
Step 5:- Standby side switchover process:

Stop the MRP process.
SQL> alter database recover managed standby database cancel;
Database altered.
Switch Over to Primary.
SQL> alter database commit to switchover to primary;
Database altered.
Check database role changed or not and open_mode.
SQL> select name,open_mode,database_role from v$database;
Open the database.
SQL> alter database open;
Database altered.
Check the database role and open_mode.
SQL> select name,open_mode,database_role from v$database;
Step 6:- Check the log sync status both sides.
SQL> archive log list

Check both side log sync status.

Step 7:- New primary database parameter configuration for log sync.
SQL> alter system set log_archive_dest_1 =’location=use_db_recovery_file_dest valid_for=(all_logfiles,all_roles) db_unique_name=local’ scope=spfile;
System altered.

SQL> alter system set log_archive_dest_2 =’service=cloud async valid_for=(online_logfiles,primary_role) db_unique_name=cloud’ scope=spfile;
System altered.

SQL> alter system set db_file_name_convert=’/u01/app/oracle/oradata/LOCAL/datafile/’,’/u01/app/oracle/oradata/CLOUD/datafile/’ scope=spfile;
System altered.

SQL> alter system set log_file_name_convert=’/u01/app/oracle/oradata/LOCAL/onlinelog/’,’/u01/app/oracle/oradata/CLOUD/onlinelog/’ scope=spfile;
System altered.

SQL> ALTER SYSTEM SET log_archive_config=’dg_config=(local,cloud)’ SCOPE=both;
System altered.

SQL> ALTER SYSTEM SET fal_server=’cloud’ SCOPE=both;
System altered.

SQL> ALTER SYSTEM SET fal_client=’local’ SCOPE=both;
System altered.

SQL> select DEST_NAME,STATUS,ERROR from v$ARCHIVE_DEST where status!=’INACTIVE’;
DEST_NAME
——————————————————————————–
STATUS ERROR
——— —————————————————————–
LOG_ARCHIVE_DEST_1
VALID
Step 8:-Switch log files and check the log sync status.
Primary side switch logfiles:
enable log_archive_dest_state_2.
SQL> alter system switch logfile;
SQL> archive log list
Check log file sync status on standby side:-
Restart the MRP process.
SQL> alter database recover managed standby database cancel;
Database altered.
SQL> alter database recover managed standby database disconnect nodelay;
Database altered.
check log sync status.
SQL> SELECT ARCH.THREAD# “Thread”, ARCH.SEQUENCE# “Last Sequence Received”,
APPL.SEQUENCE# “Last Sequence Applied”,
(ARCH.SEQUENCE# – APPL.SEQUENCE#) “Difference” FROM
(SELECT THREAD# ,SEQUENCE# FROM V$ARCHIVED_LOG WHERE (THREAD#,FIRST_TIME )
IN (SELECT THREAD#,MAX(FIRST_TIME) FROM V$ARCHIVED_LOG GROUP BY THREAD#)) ARCH,
(SELECT THREAD# ,SEQUENCE# FROM V$LOG_HISTORY WHERE (THREAD#,FIRST_TIME )
IN (SELECT THREAD#,MAX(FIRST_TIME) FROM V$LOG_HISTORY GROUP BY THREAD#)) APPL
WHERE
ARCH.THREAD# = APPL.THREAD#
ORDER BY 1;


Thank you for giving your valuable time to read the above information.

If you want to be updated with all our articles send us the Invitation or Follow us:

Ramkumar’s LinkedIn: https://www.linkedin.com/in/ramkumardba/
LinkedIn Group: https://www.linkedin.com/in/ramkumar-m-0061a0204/
Facebook Page: https://www.facebook.com/Oracleagent-344577549964301
Ramkumar’s Twitter: https://twitter.com/ramkuma02877110
Ramkumar’s Telegram: https://t.me/oracleageant
Ramkumar’s Facebook: https://www.facebook.com/ramkumarram8

Adding NEW disk group in ASM

Description:
          In this blog, we are going to see step by step process for adding a disk in ASM disk group.

Rebalance ASM Disks:
          Oracle ASM automatically rebalances disk groups when their configuration changes. You might want to do a manual rebalance operation to control the speed of what would otherwise be an automatic rebalance operation.

Pre request-
Add needed disk space in virtual machine.

Steps:-

1. Login as root user source the bash profile:

[oracle@asm ~]$ . .bash_profile
[oracle@asm ~]$ su root
Password:
[root@asm oracle]#
[root@asm oracle]# cd

2. New disk configuration:

[root@asm ~]# fdisk /dev/sdd
Welcome to fdisk (util-linux 2.23.2).

Changes will remain in memory only until you decide to write them.
Be careful before using the write command.

The device does not contain a recognized partition table
Building a new DOS disklabel with disk identifier 0xf8f5f5c6.

Command (m for help): m
Command action
a toggle a bootable flag
b edit bsd disklabel
c toggle the dos compatibility flag
d delete a partition
g create a new empty GPT partition table
G create an IRIX (SGI) partition table
l list known partition types
m print this menu
n add a new partition
o create a new empty DOS partition table
p print the partition table
q quit without saving changes
s create a new empty Sun disklabel
t change a partition’s system id
u change display/entry units
v verify the partition table
w write table to disk and exit
x extra functionality (experts only)

Command (m for help): n
Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
Select (default p):
Using default response p
Partition number (1-4, default 1):
First sector (2048-10485759, default 2048):
Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-10485759, default 10485759):
Using default value 10485759
Partition 1 of type Linux and of size 5 GiB is set

Command (m for help): w
The partition table has been altered!

Calling ioctl() to re-read partition table.
Syncing disks.

3. List the disks:

[root@asm ~]# fdisk -l

Disk /dev/sda: 107.4 GB, 107374182400 bytes, 209715200 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x0001d229

Device Boot Start End Blocks Id System
/dev/sda1 * 2048 14338047 7168000 83 Linux
/dev/sda2 14338048 98306047 41984000 83 Linux
/dev/sda3 98306048 182274047 41984000 83 Linux
/dev/sda4 182274048 209715199 13720576 5 Extended
/dev/sda5 182276096 196612095 7168000 82 Linux swap / Solaris

Disk /dev/sdb: 21.5 GB, 21474836480 bytes, 41943040 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0xeba933f3

Device Boot Start End Blocks Id System
/dev/sdb1 2048 41943039 20970496 83 Linux

Disk /dev/sdc: 10.7 GB, 10737418240 bytes, 20971520 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x330f95dd

Device Boot Start End Blocks Id System
/dev/sdc1 2048 20971519 10484736 83 Linux

Disk /dev/sdd: 5368 MB, 5368709120 bytes, 10485760 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0xf8f5f5c6

Device Boot Start End Blocks Id System
/dev/sdd1 2048 10485759 5241856 83 Linux

4. Configure oracle ASM:

[root@asm ~]# oracleasm configure -i
Configuring the Oracle ASM library driver.

This will configure the on-boot properties of the Oracle ASM library
driver. The following questions will determine whether the driver is
loaded on the boot and what permissions it will have. The current values
will be shown in brackets (‘[]’). Hitting <ENTER> without typing an
answer will keep that current value. Ctrl-C will abort.

Default user to own the driver interface [oracle]:
Default group to own the driver interface [oinstall]:
Start Oracle ASM library driver on boot (y/n) [y]:
Scan for Oracle ASM disks on boot (y/n) [y]:
Writing Oracle ASM library driver configuration: done
[root@asm ~]#

5. OS level disk creation:

[root@asm ~]# /usr/sbin/oracleasm init
[root@asm ~]# /usr/sbin/oracleasm createdisk DISK3 /dev/sdd1
Writing disk header: done
Instantiating disk: done
[root@asm ~]# cd /dev/oracleasm/disks/
[root@asm disks]#
[root@asm disks]#
[root@asm disks]#
[root@asm disks]#
[root@asm disks]# ls -lrt
total 0
brw-rw—-. 1 oracle oinstall 8, 49 Jan 6 06:15 DISK3
brw-rw—-. 1 oracle oinstall 8, 33 Jan 6 06:16 DISK2
brw-rw—-. 1 oracle oinstall 8, 17 Jan 6 06:16 DISK1
[root@asm disks]# oracleasm listdisks
DISK1
DISK2
DISK3
[root@asm disks]#
[root@asm disks]#
[root@asm disks]#
[root@asm disks]#

6. Create the disk using rebalance:

[oracle@asm ~]$ . .bash_profile
[oracle@asm ~]$ . grid.env
[oracle@asm ~]$ sqlplus / as sysasm

SQL*Plus: Release 19.0.0.0.0 – Production on Thu Jan 6 06:13:02 2022
Version 19.3.0.0.0

Copyright (c) 1982, 2019, Oracle. All rights reserved.

Connected to:
Oracle Database 19c Enterprise Edition Release 19.0.0.0.0 – Production
Version 19.3.0.0.0

7. Check the disk group status:
SQL> set lines 999;
col diskgroup for a15
col diskname for a15
col path for a35
select a.name DiskGroup,b.name DiskName, b.total_mb, (b.total_mb-b.free_mb) Used_MB, b.free_mb,b.path,b.header_status
from v$asm_disk b, v$asm_diskgroup a
where a.group_number (+) =b.group_number order by b.group_number,b.name;SQL> SQL> SQL> SQL> 2 3

DISKGROUP DISKNAME TOTAL_MB USED_MB FREE_MB PATH HEADER_STATU
————— ————— ———- ———- ———- ———————————– ————
0 0 0 /dev/oracleasm/disks/DISK3 PROVISIONED
DATA DATA_0000 20476 3380 17096 /dev/oracleasm/disks/DISK1 MEMBER
DATA DATA_0001 10236 1676 8560 /dev/oracleasm/disks/DISK2 MEMBER

8. Create a disk in asm using rebalance method:

SQL> alter diskgroup DATA add disk ‘/dev/oracleasm/disks/DISK3’ NAME DISK3 rebalance power 100;

Diskgroup altered.

9. Check the status of new disk group its shown as RUN:

SQL> col ERROR_CODE for a10
col PASS for a10
select * from v$asm_operation;SQL> SQL>

GROUP_NUMBER OPERA PASS STAT POWER ACTUAL SOFAR EST_WORK EST_RATE EST_MINUTES ERROR_CODE CON_ID
———— —– ———- —- ———- ———- ———- ———- ———- ———– ———- ———-
1 REBAL COMPACT WAIT 100 100 0 0 0 0 0
1 REBAL REBALANCE RUN 100 100 163 183 6515 0 0
1 REBAL REBUILD DONE 100 100 0 0 0 0 0

10. Check after some time it will show no rows selected so it can be created fine:

SQL> select * from v$asm_operation;
no rows selected

11. View the disk group:

SQL> set lines 999;
col diskgroup for a15
col diskname for a15
col path for a35
select a.name DiskGroup,b.name DiskName, b.total_mb, (b.total_mb-b.free_mb) Used_MB, b.free_mb,b.path,b.header_status
from v$asm_disk b, v$asm_diskgroup a
where a.group_number (+) =b.group_number order by b.group_number,b.name;SQL> SQL> SQL> SQL> 2 3

DISKGROUP DISKNAME TOTAL_MB USED_MB FREE_MB PATH HEADER_STATU
————— ————— ———- ———- ———- ———————————– ————
DATA DATA_0000 20476 2884 17592 /dev/oracleasm/disks/DISK1 MEMBER
DATA DATA_0001 10236 1456 8780 /dev/oracleasm/disks/DISK2 MEMBER
DATA DISK3 5116 728 4388 /dev/oracleasm/disks/DISK3 MEMBER

 

Thank you for giving your valuable time to read the above information.

If you want to be updated with all our articles send us the Invitation or Follow us:

Ramkumar’s LinkedIn: https://www.linkedin.com/in/ramkumardba/
LinkedIn Group: https://www.linkedin.com/in/ramkumar-m-0061a0204/
Facebook Page: https://www.facebook.com/Oracleagent-344577549964301
Ramkumar’s Twitter: https://twitter.com/ramkuma02877110
Ramkumar’s Telegram: https://t.me/oracleageant
Ramkumar’s Facebook: https://www.facebook.com/ramkumarram8

 

Output Post Processor (OPP) in Oracle Applications R12 and 11i

Output Post Processor (OPP) in Oracle Applications R12 and 11i

ebs

OPP runs as a service that can be managed through Oracle Applications Manager (OAM) from the System Activity page (Navigation: Applications Dashboard > Applications

Service (from the dropdown list) > Go).

How to Increase the number of Output Post Processors?
1.Log on to Applications with “System Administrator” responsibility.
2.Navigate to Concurrent -> Manager -> Define.
3. Query for the “Output Post Processor” service.
4. Click on “Work Shifts” and increase the number of processes

How to get OPP manager log file location?

$APPLCSF/log/<SID>/FNDOPP####.txt       OR
1,System Administrator > Concurrent > Manager > Administer
2,Search for ‘Output Post Processor’
3,Click the ‘Processes’ button .
4, Click the Manager Log button. This will open the ‘OPP’
Upload the OPP log file.

In some cases, Output Post Processor is not starting up and it shows Actual and Target are showing different values when we query for Output Post Processor.
The log files show no error message. In this case, apply the following possible solution for starting the OPP.

1. Shut down the internal manager by using adcmctl.sh stop apps/apps
2. Make sure there are no FNDLIBR processes running:
$ ps -ef| grep FNDLIBR OR ps -ef|grep applprod|grep FNDLIBR
3. If there is any FNDLIBR process please kill it $ kill -9 pid
4. Run cmclean.sql script
5. Restart the internal manager by using adcmctl.sh start apps/apps

or How to kill and start Output Post Processor (OPP) Background:
This article explains how to kill OPP and restart the same

Solution:
1,System Administator > Concurrent > Manager > Administer
2,Query “Output Post Processor” -> Processes button
Get the sytem id of “Output Post Processor”
3,ps -ef|grep [system id]
4,kill -9 [system id] in Unix
5,System Administator > Concurrent > Manager > Administer
6,Query “Output Post Processor” -> Restart button

Thank you for giving your valuable time to read the above information.

If you want to be updated with all our articles send us the Invitation or Follow us:

Ramkumar’s LinkedIn: https://www.linkedin.com/in/ramkumardba/
LinkedIn Group: https://www.linkedin.com/in/ramkumar-m-0061a0204/
Facebook Page: https://www.facebook.com/Oracleagent-344577549964301
Ramkumar’s Twitter: https://twitter.com/ramkuma02877110
Ramkumar’s Telegram: https://t.me/oracleageant
Ramkumar’s Facebook: https://www.facebook.com/ramkumarram8

ASM File Handling Basics

ASM File Handling Basics

Description:
          In this blog we are going to see datafile,logfile,and archivelog create,resize delete in the ASM oracle database server.

Oracle ASM:

         Oracle ASM is a volume manager and a file system for Oracle database files that supports single-instance Oracle Database and Oracle Real Application Clusters (Oracle RAC) configurations. Oracle ASM is Oracle’s recommended storage management solution that provides an alternative to conventional volume managers, file systems, and raw devices.

ASM Disk Groups:

         Oracle ASM uses disk groups to store data files; an Oracle ASM disk group is a collection of disks that Oracle ASM manages as a unit. Within a disk group, Oracle ASM exposes a file system interface for Oracle database files.

  1. Check datafile logfile and archivelog location in ASM

SQL> select name from v$datafile;
NAME
————————————————————————————————–

+DATA/ORAASM/DATAFILE/system.257.1092813819

+DATA/ORAASM/DATAFILE/sysaux.258.1092813853

+DATA/ORAASM/DATAFILE/undotbs1.259.1092813869

+DATA/ORAASM/86B637B62FE07A65E053F706E80A27CA/DATAFILE/system.270.1092814419

+DATA/ORAASM/86B637B62FE07A65E053F706E80A27CA/DATAFILE/sysaux.271.1092814421

+DATA/ORAASM/DATAFILE/users.260.1092813869

+DATA/ORAASM/86B637B62FE07A65E053F706E80A27CA/DATAFILE/undotbs1.272.1092814421

+DATA/ORAASM/D47CEAB72C2F2513E053867EA8C0538D/DATAFILE/system.276.1092815375

+DATA/ORAASM/D47CEAB72C2F2513E053867EA8C0538D/DATAFILE/sysaux.277.1092815375

+DATA/ORAASM/D47CEAB72C2F2513E053867EA8C0538D/DATAFILE/undotbs1.275.1092815375

+DATA/ORAASM/D47CEAB72C2F2513E053867EA8C0538D/DATAFILE/users.279.1092815459

+DATA/ORAASM/DATAFILE/tblspace.280.1093044407

+DATA/ORAASM/DATAFILE/tblspace.281.1093044531

13 rows selected.

Logfiles :

SQL>  select member from v$logfile;

MEMBER
————————————————————————————————–

+DATA/ORAASM/ONLINELOG/group_3.267.1092813959

+DATA/ORAASM/ONLINELOG/group_3.268.1092813965

+DATA/ORAASM/ONLINELOG/group_2.263.1092813937

+DATA/ORAASM/ONLINELOG/group_2.266.1092813951

+DATA/ORAASM/ONLINELOG/group_1.264.1092813937

+DATA/ORAASM/ONLINELOG/group_1.265.1092813949

6 rows selected.

Archivelogs:

SQL> archive log list

Database log mode        Archive Mode

Automatic archival        Enabled

Archive destination        USE_DB_RECOVERY_FILE_DEST

Oldest online log sequence     14

Next log sequence to archive   16

Current log sequence        16

SQL> show parameter db_recovery_file_dest

NAME      TYPE  VALUE

———————————— ———– ——————————

db_recovery_file_dest      string  +DATA

db_recovery_file_dest_size      big integer 12732M

  1. Create new Datafiles,logfiles, archivelogs in ASM Disks

Datafile:

SQL> create tablespace test datafile’+data’;

Tablespace created.

SQL> select name from v$datafile;

NAME
————————————————————————————————–

+DATA/ORAASM/DATAFILE/system.257.1092813819

+DATA/ORAASM/DATAFILE/sysaux.258.1092813853

+DATA/ORAASM/DATAFILE/undotbs1.259.1092813869

+DATA/ORAASM/86B637B62FE07A65E053F706E80A27CA/DATAFILE/system.270.1092814419

+DATA/ORAASM/86B637B62FE07A65E053F706E80A27CA/DATAFILE/sysaux.271.1092814421

+DATA/ORAASM/DATAFILE/users.260.1092813869

+DATA/ORAASM/86B637B62FE07A65E053F706E80A27CA/DATAFILE/undotbs1.272.1092814421

+DATA/ORAASM/D47CEAB72C2F2513E053867EA8C0538D/DATAFILE/system.276.1092815375

+DATA/ORAASM/D47CEAB72C2F2513E053867EA8C0538D/DATAFILE/sysaux.277.1092815375

+DATA/ORAASM/D47CEAB72C2F2513E053867EA8C0538D/DATAFILE/undotbs1.275.1092815375

+DATA/ORAASM/D47CEAB72C2F2513E053867EA8C0538D/DATAFILE/users.279.1092815459

+DATA/ORAASM/DATAFILE/tblspace.280.1093044407

+DATA/ORAASM/DATAFILE/tblspace.281.1093044531

+DATA/ORAASM/DATAFILE/test.282.1094538795

14 rows selected.

SQL>

SQL> select tablespace_name,file_name from dba_data_files where tablespace_name=’TEST’;

TABLESPACE_NAME   FILE_NAME

TEST                           +DATA/ORAASM/DATAFILE/test.282.1094538795

Logfiles: 

SQL> select member from v$logfile;

MEMBER
————————————————————————————————–

+DATA/ORAASM/ONLINELOG/group_3.267.1092813959

+DATA/ORAASM/ONLINELOG/group_3.268.1092813965

+DATA/ORAASM/ONLINELOG/group_2.263.1092813937

+DATA/ORAASM/ONLINELOG/group_2.266.1092813951

+DATA/ORAASM/ONLINELOG/group_1.264.1092813937

+DATA/ORAASM/ONLINELOG/group_1.265.1092813949

6 rows selected.

SQL> alter database add logfile;

Database altered.

SQL>  select member from v$logfile;

MEMBER
————————————————————————————————–

+DATA/ORAASM/ONLINELOG/group_3.267.1092813959

+DATA/ORAASM/ONLINELOG/group_3.268.1092813965

+DATA/ORAASM/ONLINELOG/group_2.263.1092813937

+DATA/ORAASM/ONLINELOG/group_2.266.1092813951

+DATA/ORAASM/ONLINELOG/group_1.264.1092813937

+DATA/ORAASM/ONLINELOG/group_1.265.1092813949

+DATA/ORAASM/ONLINELOG/group_4.283.1094538977

+DATA/ORAASM/ONLINELOG/group_4.284.1094538977

8 rows selected.

SQL>

  1. Alter / Resize existing Datafiles,logfiles, archivelogs in ASM Disks:

Datafiles:

alter database datafile ‘+DATA/ORAASM/DATAFILE/test.282.1094538795’ resize 150m;

 select file_name,bytes/1024/1024mb from dba_data_files where tablespace_name=’TEST’ order by file_name;

SQL> alter database datafile ‘+DATA/ORAASM/DATAFILE/test.282.1094538795’ resize 150m;

Database altered.

SQL> select file_name,bytes/1024/1024mb from dba_data_files where tablespace_name=’TEST’ order by file_name;

FILE_NAME                                                                       MB

+DATA/ORAASM/DATAFILE/test.282.1094538795           150

SQL> 

Logfiles:
SQL> alter database drop logfile group 4;

Database altered.

SQL> select member from v$logfile;

MEMBER
————————————————————————————————–

+DATA/ORAASM/ONLINELOG/group_3.267.1092813959

+DATA/ORAASM/ONLINELOG/group_3.268.1092813965

+DATA/ORAASM/ONLINELOG/group_2.263.1092813937

+DATA/ORAASM/ONLINELOG/group_2.266.1092813951

+DATA/ORAASM/ONLINELOG/group_1.264.1092813937

+DATA/ORAASM/ONLINELOG/group_1.265.1092813949

6 rows selected.

SQL>

ALTER DATABASE ADD LOGFILE THREAD 1 GROUP 4 (‘+DATA’,’+DATA’) SIZE 1G;

SQL> ALTER DATABASE ADD LOGFILE THREAD 1 GROUP 5 (‘+DATA’,’+DATA’) SIZE 1G;

Database altered.

SQL> select thread#,group#,bytes/1024/1024,members,status from v$log;

 

   THREAD#     GROUP# BYTES/1024/1024  MEMBERS STATUS

———- ———- ————— ———- —————-

 1     1   200        2 CURRENT

 1     2   200        2 INACTIVE

 1     3   200        2 INACTIVE

 1     4   100        2 UNUSED

 1     5  1024        2 UNUSED

SQL>

 

 

Thank you for giving your valuable time to read the above information.

If you want to be updated with all our articles send us the Invitation or Follow us:

Ramkumar’s LinkedIn: https://www.linkedin.com/in/ramkumardba/
LinkedIn Group: https://www.linkedin.com/in/ramkumar-m-0061a0204/
Facebook Page: https://www.facebook.com/Oracleagent-344577549964301
Ramkumar’s Twitter: https://twitter.com/ramkuma02877110
Ramkumar’s Telegram: https://t.me/oracleageant
Ramkumar’s Facebook: https://www.facebook.com/ramkumarram8

 

How to change apps& sysadmin password in R12.2

How to change apps& sysadmin passwords in R12.2

Important Note: These steps must be carried out on the run file system.

Step 1. Shut down the application tier services using the

[applmgr@document appl]$INST_TOP/admin/scripts/adstpall.sh

 

  1. Change the APPLSYS password.

[applmgr@document appl]$ FNDCPASS apps/apps  0 Y system/ manager   SYSTEM APPLSYS <new apps passwd>

FNDCPASS apps/apps 0 Y system/manager SYSTEM APPLSYS newpasswd

  1. Start AdminServer using the $INST_TOP/admin/scripts/adadminsrvctl.sh
    Note:Don’t start any other application tier services.
  2. Change the “apps” password in WLS Datasource as follows:
    Log in to WLS Administration Console. http://document.subnet.vcn.oraclevcn.com:8000/OA_HTML/AppsLogin

Click Lock & Edit in Change Center.
In the Domain Structure tree, expand Services, then select Data Sources.
On the “Summary of JDBC Data Sources” page, select EBSDataSource
On the “Settings for EBSDataSource” page, select the Connection Pool tab.
Enter the new password in the “Password” field.
Enter the new password in the “Confirm Password” field.
Click Save.

Check whether you are able to connect to DB using apps
sqlplus apps/<newpassword> from application tier.

Before Starting all the services. Run Autoconfig.
cd $ADMIN_SCRIPTS_HOME
sh adautocfg.sh

Now start the services.
Start all the application tier services using the
$INST_TOP/admin/scripts/adstrtal.sh script.

 

How to change the SYSADMIN password

 

[applmgr@document appl]$  FNDCPASS apps/*** 0 Y system/manager USER SYSADMIN new_password

What is Apps Schema?

 

Apps are a schema that does not contain any tables of itself. We can say APPS is the shared runtime schema for all E-Business Suite products. It contains all the synonyms of all the tables in Oracle apps. But it also contains packages, functions, procedures. The default password is apps.

 

What is Applsys Schema?

Applsys schema contains all the tables required for administrative purposes. The default password is apps. All the technical products’ database objects are consolidated into a single schema called Applsys

 

What is Applsyspub schema?

Applsyspub schema is responsible for password checking. The default password is pub.Applsyspub is used for authentication by having read-only views.

 

Why should Apps & Applsys passwords always be the same?

The need to have the same password for Apps and Applsys is because when you sign on to apps, initially it connects to a public schema called APPLSYSPUB. This validates the AOL username and password that we enter (operations/welcome using a guest user account. Once this is verified we select responsibility, this is validated by APPLSYS schema and then it connects to APPS schema.

 

Thank you for giving your valuable time to read the above information.

If you want to be updated with all our articles send us the Invitation or Follow us:

Ramkumar’s LinkedIn: https://www.linkedin.com/in/ramkumardba/
LinkedIn Group: https://www.linkedin.com/in/ramkumar-m-0061a0204/
Facebook Page: https://www.facebook.com/Oracleagent-344577549964301
Ramkumar’s Twitter: https://twitter.com/ramkuma02877110
Ramkumar’s Telegram: https://t.me/oracleageant
Ramkumar’s Facebook: https://www.facebook.com/ramkumarram8

HowTo: Bounce Apache Server in Oracle E-Business R12

Generally in day to days usage of Oracle Apps R12, we came up with many issues which is resolved by bouncing Apache Server like:-
– JSP page not loading
– Changes are not appearing after done with personalization
– Some weird java error.
It is really easy to get this done.

 

[oraappl@apps-node-qa ~]$ . ./EBSapps.env Run

E-Business Suite Environment Information

RUN File System : /wwi/erp/apps/fs2/EBSapps/appl
PATCH File System : /wwi/erp/apps/fs1/EBSapps/appl
Non-Editioned File System : /wwi/erp/apps/fs_ne

DB Host: apps-node-qa Service/SID: ORACLEAGENT

Sourcing the RUN File System …

[oraappl@apps-node-qa ~]$ cd $ADMIN_SCRIPTS_HOME/
[oraappl@apps-node-qa scripts]$ ls
01170919.log adapcctl.sh adexecsql.pl adnodemgrctl.sh adstpall.sh gsmstart.sh jtffmctl.sh mwactl.sh shtiloglib.pl
adadminsrvctl.sh adautocfg.sh adformsrvctl.sh adopmnctl.sh adstrtal.sh ieo L2613716.log mwactlwrpr.sh
adalnctl.sh adcmctl.sh admanagedsrvctl.sh adpreclone.pl cz64bitengine.pl java.sh msc pon64bitengine.pl

[oraappl@apps-node-qa scripts]$ sh adapcctl.sh stop

You are running adapcctl.sh version 120.0.12020000.6

Stopping OPMN managed Oracle HTTP Server (OHS) instance …

adapcctl.sh: exiting with status 0

adapcctl.sh: check the logfile /wwi/erp/apps/fs2/inst/apps/ORACLEAGENT_apps-node-qa/logs/appl/admin/log/adapcctl.txt for more information …

[oraappl@apps-node-qa scripts]$ sh adapcctl.sh start

You are running adapcctl.sh version 120.0.12020000.6

Starting OPMN managed Oracle HTTP Server (OHS) instance …

adapcctl.sh: exiting with status 0

adapcctl.sh: check the logfile /wwi/erp/apps/fs2/inst/apps/ORACLEAGENT_apps-node-qa/logs/appl/admin/log/adapcctl.txt for more information …

 

Thank you for giving your valuable time to read the above information.

If you want to be updated with all our articles send us the Invitation or Follow us:

Ramkumar’s LinkedIn: https://www.linkedin.com/in/ramkumardba/
LinkedIn Group: https://www.linkedin.com/in/ramkumar-m-0061a0204/
Facebook Page: https://www.facebook.com/Oracleagent-344577549964301
Ramkumar’s Twitter: https://twitter.com/ramkuma02877110
Ramkumar’s Telegram: https://t.me/oracleageant
Ramkumar’s Facebook: https://www.facebook.com/ramkumarram8

Oracle Data Guard Manual Failover

Oracle Data Guard Manual Failover

Description:
          In this blog, we are going to see step by step process on the oracle data guard manual failover process.

Failover:
          A failover is a role transition in which one of the standby databases is transitioned to the primary role after the primary database fails or has become unreachable. A failover may or may not result in data loss depending on the protection mode in effect at the time of the failover.

Data Guard Configuration Details:-
Overall Steps:-

1. Check the database role,open_mode in standby server.
2. Cancel MRP process.
3. Change Standby to Primary Database.
4. Bounce the database.

Step 1:- Check the database role,open_mode in the standby server.
SQL> select name,open_mode,database_role from v$database;
NAME OPEN_MODE DATABASE_ROLE
——— ——————– —————-
CLOUD MOUNTED PHYSICAL STANDBY

Step 2:- Cancel MRP process:

Check back ground process:
[oracle@primary dbs]$ ps -ef | grep pmon
oracle 10854 1 0 13:26 ? 00:00:00 ora_pmon_cloud
oracle 27875 4420 0 14:37 pts/1 00:00:00 grep –color=auto pmon

Cancel the MRP process:
SQL> recover managed standby database cancel;
Media recovery complete.

Finish the MRP process:
SQL> alter database recover managed standby database finish;
Database altered.
Step 3:- Change Standby to Primary Database.
SQL> alter database activate standby database;
Database altered.

Check the role changed or not:
SQL> select name,open_mode,database_role from v$database;
NAME OPEN_MODE DATABASE_ROLE
——— ——————– —————-
CLOUD MOUNTED PRIMARY
Step 4:- Bounce the Database.
SQL> shut immediate
SQL> startup
Check the database role and status.
SQL> select name,open_mode,database_role from v$database;
NAME OPEN_MODE DATABASE_ROLE
——— ——————– —————-
CLOUD READ WRITE PRIMARY


Thank you for giving your valuable time to read the above information.

If you want to be updated with all our articles send us the Invitation or Follow us:

Ramkumar’s LinkedIn: https://www.linkedin.com/in/ramkumardba/
LinkedIn Group: https://www.linkedin.com/in/ramkumar-m-0061a0204/
Facebook Page: https://www.facebook.com/Oracleagent-344577549964301
Ramkumar’s Twitter: https://twitter.com/ramkuma02877110
Ramkumar’s Telegram: https://t.me/oracleageant
Ramkumar’s Facebook: https://www.facebook.com/ramkumarram8